8115 Hospital and Public Office Floor Plan

Application areas: Places with high requirements for cleanliness, slip resistance, and wear resistance, such as hospital corridors, wards, operating rooms, public office lobbies, schools, etc.

i.Raw Material Usage and Cost (Per Square Meter)

II. Core Advantages of the Solution

Eco-Friendly & Safe:6230 water-based two-component primer: Low VOC.8115 water-based matte topcoat: Solvent-free, compliant with hospital environmental standards.

Slip-Resistant & Durable:High friction coefficient of matte topcoat.Epoxy screed + mortar intermediate coat provides dual wear resistance.

Chemical Resistance:Withstands disinfectants (e.g., alcohol, sodium hypochlorite) and cleaning agents, extending floor lifespan.

Easy-Clean & Antibacterial:Smooth matte surface prevents dust accumulation.Epoxy topcoat offers antibacterial properties, ideal for high-frequency disinfection in hospitals.

Aesthetic & Comfortable:Matte finish reduces glare; soft colors (e.g., light gray, beige) enhance public space ambiance.

III. Construction Procedure

1. Substrate Preparation

Requirements: Oil-free, dust-free, crack-free; moisture ≤8%; flatness ≤3mm/2m.

Tools: Grinder, vacuum, crack repair materials.

2. Primer Application

Material: 6230 water-based two-component primer (20kg base + 4kg hardener/unit).

Mixing Ratio: 5:1 (base:hardener, pre-packed units).

Coverage: 120g/m² (1 coat, trowel/roller).

Drying: 2 hours touch-dry (25°C).

3. Mortar Intermediate Coat

Material: SW8400H water-based polyurethane mortar.

Mixing Ratio: 2.5kg resin : 5kg hardener : 14.2kg aggregate/unit.

Coverage: 2kg/m² (1mm thickness, single-pass troweling).

Key Steps: Eliminate bubbles; ensure smooth, pit-free surface.Drying: 12 hours (25°C).

4. Epoxy Topcoat Application

Material: Two-component epoxy topcoat.

Mixing Ratio: 4:1 (base:hardener).

Coverage: 180g/m² (1–2 roller coats).

Drying: 6 hours touch-dry; 24 hours full cure (25°C).

5. Matte Topcoat Application

Material: 8115 water-based matte topcoat + S-105 hardener.

Mixing Ratio: 5:1 (base:hardener).

Coverage: 180g/m² (1 roller coat).

Drying: 4 hours touch-dry; 24 hours full cure (25°C).

IV. Key Quality Controls

Mixing Accuracy:Mortar and epoxy topcoat must follow pre-pack ratios to avoid curing defects.

Matte topcoat at 5:1 ensures adhesion and matte effect.

Environment: 5–35°C; humidity ≤75%; avoid rainy days.

Thickness Tolerance: Mortar ≤0.2mm deviation; full coverage for topcoats.

Antibacterial Option: Post-application antimicrobial coating (optional) for higher hygiene standards.

V. Recommended Applications & Upgrades

Applications: Hospital corridors, wards, ORs, office lobbies, schools—areas demanding cleanliness, slip resistance, and durability.

Premium Upgrade: Replace 8115 with Shiquanxing 3001A solvent-free matte topcoat for enhanced chemical resistance and matte performance.